General Specifications - Fujitsu F2MC-16L Hardware Manual

1.3

General Specifications

This section covers the general specifications of the emulator.
I General specifications
CAUTION
Caution
Table 1.3-1 "General specifications" lists the general specifications of the emulator.
The following names used in this manual have the following definitions:
• Emulator: Emulator unit + adapter board
• Emulator system: Emulator unit + adapter board + probe
Table 1.3-1 General specifications
Item
Name
Model name
Emulator power supply
Evaluation MCU power
supply
Operating frequency
Temperature
Humidity
External dimensions
Weight
*1: The upper and lower voltage limits depend on the evaluation MCU used.
For more information, contact the Fujitsu Sales Dept. or Support Dept.
*2: The current consumption of the evaluation MCU is excluded.
*3: The upper and lower frequency limits depend on the evaluation MCU used. The upper and lower frequency limits may
depend on the operating voltage, even if the same evaluation MCU is used. For more information, contact the Fujitsu
Sales Dept. or Support Dept.
Use the product according to its specifications. Doing so may result in
device problems.
2
F MC-16L/16LX Emulator
MB2147-01
Power supply input
Emulator interface power
supply output
User system power supply
input
High-speed I/F
Conventional interface
+5 to +35 degrees Celsius
20 to 80% (No condensation)
148(W) x 210(D) mm x 44(H) (excluding protruding sections and rubber feet)
700 g
Get other manuals https://www.bkmanuals.com
Specification
+16 V 2.5 A (supplied using a special AC adapter)
+3.3 V or +5.0 V (supplied from the emulator)
(*1)
+1.8 V to +5.5 V 10 mA or less
supply supported: Supplied from the user system)
(*3)
8 KHz to 33 MHz
(*3)
8 KHz to 20 MHz
1.3 General Specifications
(*2)
(Dual source power
5