Table of Contents
Advertisement
6.4
Maintenance Precautions
All internal maintenance should be performed by factory authorized personnel.
1. Turn off, lockout, and tagout ALL power sources before connecting the power wiring to the equipment or when per-
forming maintenance.
factory authorized
2. Only
service center.
Qualified Personnel ONLY!
Qualified Personnel have the skills and knowledge relating to the construction, installation, operation, and maintenance of
the electrical equipment and has received safety training on the hazards involved (Refer to the latest edition of NFPA 70E
for additional safety requirements).
Qualified Personnel shall:
1. Have read the entire operation manual.
2. Be trained and authorized to safely energize, de-energize, ground, lockout and tag circuits and equipment, and clear
faults in accordance with established safety practices.
3. Be trained in the proper use and care of protective equipment such as safety shoes, rubber gloves, hard hats, safety
glasses, face shields, flash clothing, etc., in accordance with established safety practices.
4. Be trained in rendering first aid.
5. Be knowledgeable of the SCiB ESS and the required handling and maintenance precautions.
16
personnel should service the SCiB ESS. Contact Toshiba for the nearest authorized
For further information on workplace safety visit www.osha.gov.
Misuse of equipment could result in injury and equipment damage.
In no event will Toshiba Corporation be responsible or liable for either
indirect or consequential damage or injury that may result from the
misuse of this equipment.
288V SCiB Energy Storage System Installation and Operation Manual – 203810-000
WARNING
Advertisement
Table of Contents
