Figure 34
1. Flange-head bolts (3/8 x
3/4 inch)
2. Spindle
4.
Remove the dust cap from the hub
Figure 35
1. Cotter pin
2. Spindle
3. Tab washer
5.
Remove the cotter pin and nut retainer from the
spindle and spindle nut
6.
Remove the spindle nut from the spindle, and
separate the hub and rotor assembly from the
spindle
(Figure 35
3. Caliper bracket (brake
assembly)
(Figure
4. Spindle nut
5. Nut retainer
6. Dust cap
(Figure
35).
and
Figure
36).
1. Spindle
g033047
7.
Wipe clean the spindle with a rag.
8.
Repeat steps
the other side of the machine.
35).
g192346
33
Figure 36
2. Hub and rotor assembly
1
through
7
to the hub and rotor at
g192347