3.4.
Using the API-commander
If you have successfully programmed the APIcommander-software to
your CPU-module, close the flashprogrammer tool and open the
provided terminal program „Starterkit Wizard" (SKWizVxx.exe). This
program is a standard terminal program with some more extensions for
your Cremson modular starterkit.
Execute Starterkit Wizard, select the COM-port (make sure, you still have
the RS232-line connected to your CPU-module) and press on the
connect-button. Then reset the starterkit. You should see this message :
Now you are able to control the Cremson or Scarlet device connected on
the subboard directly by using (almost) all commands available from the
„Cremson graphic driver API".
page -12-