Table of Contents
Advertisement
2. Installation
2.1.
Hardware Installation
What you'll need :
ü Host : IBM(-comp) PC with Windows 9x or Windows NT ; 1 COM-port
ü Power Requirements: A power supply, capable of supporting 9-12V
DC at about 1200 mA. Note that the power connector must be + at the
shield and - in the centre. Power supplies are available from Fujitsu.
ü RS232 : An 'extension' (1:1) RS232 cable with DB9 m+f connectors
ü A second VGA-monitor including a standard VGA-cable (alternatively,
a different display type can be connected)
1. Combine the CPU-board and the graphic subboard
2. Connect the power supply
3. Switch on the board
the power-LEDs should light up
4. Connect the RS232 cable
The board is now ready to use.
Connect the VGA cable to the VGA monitor
(or use the pin-headers for other displays)
page -7-
Advertisement
Table of Contents
