Table of Contents
Advertisement
2.2.
Software installation
Insert the provided CD-ROM, browse to the "Modular Starterkit"-section
and select the Installation option for your CPU-module and Graphic
Controller. Follow the instructions to extract the software package.
Note : If you don't have Softune Workbench installed on your PC already,
you should extract the Softune Workbench package first. Then, you
should install the "board software", which conatins example projects and
additional tools.
2.3.
"Softune" Development Environment installation
Insert the provided CD-ROM, browse to the installation page and select
the Installation option for Softune Workbench. Follow the instructions to
unpack and install Softune Workbench for FR ,as well as some
example projects and additional tools for the Cremson Starterkit. It is
recommended to use the default installation path C:\Softune.
Then select the installation option for your board software (tools and
examples).
After the installation, you will find all language tools, the IDE and other
system files within the directory Softune\Bin.
Starterkit can be found in
directory contains additional software tools (terminal, flashloader etc.).
Execute "FR Family Softune Workbench" from your Start-Menu.
If any errors occur during installation, remove any previous versions of
Softune Workbench from your PC and retry. Make sure you have enough
disk space available and you have Windows 95, 98 or NT installed. For
more information see the provided installation information and last-
minute information.
the \sample directory.
page -8-
Samples for the
The \tools
Advertisement
Table of Contents
