Connecting The Usb Cable - Hitachi StarBoard Link EZ2 User Manual

StarBoard Link EZ2
(2) Align the center of the digitizer with the center of the projection area, 5 cm (2 inches) above the
projection area, and install so it is parallel with the edge of the projection area.
Wood screws

2.3.4 Connecting the USB Cable

(1) Install the cable holder, and then hook the USB cable into the holder to fix it in place.
*Attach the cable holder outside the reflective bars.
Fixing Screws
When installing onto a wall where magnets cannot
be used, fix the cable holder with wood screws.
Center
5cm (2 inches)
Projection Area
USB cable
2-8
Assembly and Setup
Digitizer
Cable holder
English