Basic Operations Of The Electronic Pen; Customizing The Electronic Pen - Hitachi StarBoard Link EZ2 User Manual

StarBoard Link EZ2

3.3.3 Basic Operations of the Electronic Pen

In the default settings of the electronic pen, the pen tip button is set to the left button of the mouse in
Windows and the main button click in Mac. You can use the pen tip button to perform the following
mouse operations while Windows or Mac is running.
The following xxxx/xxxx description is for functions and operations in a Windows environment or Mac
environment.
- Left click / Primary mouse button click
Push the pen tip onto the projection area with sufficient force, and then quickly move the
pen away.
- Double click / Primary mouse button Double click
Push the pen tip onto the projection area with sufficient force, and then quickly move the
pen away two times in the same spot.
- Drag / Drag
Push the pen tip onto the projection area with sufficient force, and without releasing it
from the projection area, move it from one point to another.

3.3.4 Customizing the Electronic Pen

The electronic pen has one pen tip button and three side buttons. Mouse actions can be
assigned to these four buttons.
The default button settings are shown in the following table.
Button Name
Pen tip
L (Side button No. 0)
R (Side button No. 1)
C (Side button No. 2)
Pen tip
* The assignment of the side button can be changed by selecting "MENU" on the StarBoard
Software toolbar → "Settings" → "StarBoard" → "StarBoard Settings" → "Configure pen
buttons" (This function can only be changed in Windows.)
Windows *
Left click
Left double click
Right click
Hides/displays the
StarBoard Software Toolbar
R
L
Function
Primary mouse button click
Primary mouse button Double
click
Secondary Button click
Hides/displays
Software Toolbar
3-8
How to use
Mac
the StarBoard
C
English