Assembly And Setting Up; Before First Use - Silvercrest 389578 2201 Operating Instructions Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 4

Assembly and setting up

WARNING! RISK OF FIRE!
Never place the device underneath wall cupboards or next to curtains,
cupboard walls or other flammable objects.
Always place the appliance on a heat-resistant surface.
1) Take all the parts out of the box and remove the packaging material and any
protective wrapping or stickers.
2) Clean all of the components as described in the Chapter "Cleaning and care"
to remove any packaging residue. Ensure that all parts are completely dry.
3) Place the appliance on a clean and level heat-resistant surface. Do not place
the appliance directly next to a wall or a cupboard. Each person should have
unimpaired access to the pans 6.
4) Place the stone griddle 5 on one side of the appliance between the guide
rails. The fat channel around the edges must face upwards.
5) Place the griddle 1 on the other side. The griddle 1 can be used on both
sides. If you use the grooved side of the griddle, your food will have the
typical grill pattern.
6) Push the pans 6 into the device.
Before first use
The appliance is assembled and set up as described above.
1) Insert the plug into a mains power socket. The power indicator lamp 4 lights
up red to show that the appliance is connected to the mains.
2) Turn the temperature control 2 to MAX. The heat-up indicator lamp 3 lights
up green to show that the appliance is heating up.
3) After 20 minutes, turn the temperature control 2 to 0.
4) Then pull out the plug and allow the appliance to cool down.
NOTE
The first time the appliance heats up, a small amount of smoke and odour
may be generated due to production-related residue. This is normal and is
completely harmless. Ensure sufficient ventilation; for example, by opening
a window.
5) Clean the griddle 1, the stone griddle 5, the spatula 7 and the pans 6 as
described in the section "Cleaning and care".
6) Ensure that all parts are completely dry before operating the device.
The appliance is now ready for use.
GB │ IE
6 
SRGS 1400 D4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Srgs 1400 d4

Table of Contents