Operation; Hand Blender And Whisk Operation - Silvercrest 378195 2110 Operating Instructions Manual

NOTE
The blade 7 is not completely fixed to the holder. This is normal. The
►
blade 7 is only completely fixed when the bowl lid 6 has been put on.
Add the food you wish to chop into the bowl 8.
■
NOTE
Fill the bowl 8 only up to the 500 ml mark
►
and only up to the 300 ml mark
Put the bowl lid 6 on the bowl 8. When doing so, make sure that the
■
blade 7 is correctly engaged in the bowl lid 6.
Fit the motor unit 4 into the mount on the bowl lid 6. Make sure that the
■
two opposing fixing pins on the motor unit slide into the tracks provided for
this purpose in the mount. Otherwise, the motor unit 4 cannot be connected
to the fitting on the bowl lid 6.
NOTE
If you want to store food in the bowl 8, you can use the lid 9. To do this,
►
carefully remove the bowl lid 6 and motor unit 4 and also the blade 7
if necessary.

Operation

WARNING! RISK OF INJURY!
► The food being processed must not be too hot! Splashing contents could
scald the user.
WARNING! RISK OF INJURY!
► The blade is extremely sharp! Handle it with great care at all times.

Hand blender and whisk operation

NOTE
Fill the measuring beaker w only up to the 300 ml mark with food/liquids.
►
Once you have assembled the appliance as required:
1) Insert the plug into the mains power socket.
2) Hold down the switch
the speed regulator 1 towards "Max" to increase the speed. Turn the speed
regulator 1 towards "Min" to decrease the speed.
SSMS 600 E6
when processing liquids.
2 to process the food at a normal speed. Turn
when processing food
GB │ IE │
9 ■