LG GD1329CES Owner's Manual page 17

Part 5 PROGRAMMING MODE -
2 2
How to change special price
Entering set up mode.
You will see LqC1
Note
• SPCP (special cold price) is not available in dryer.
• SPrP (special warm price) is not available in dryer.
• SPHP (special hot price) is not available in dryer.
• SCPA (add super cycle price) is not available in dryer.
• SPCt (add super wash type) is not available in dryer.
Press the High Temp. button.
Press the Med Temp. or the Low Temp.
button until appears in the display.
Press the Start button.
Press the Med Temp. or the Low Temp.
button until appears in the display.
Press the Start button.
Display previous special price.
Press Med Temp.(+) or Low Temp.(-) button to set special
price.
(The vend price can be set from 0 to $9.95 in 5¢ increments.)
Press the Start button.
The machine sets up the regular price, then advances to the
next process automatically.
1. Continue to set up the next price.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• Stack type - 1. Control panel open.
2. Turn on/off toggle switch.
Setup Mode
Button Display
1 7