LG GD1329CES Owner's Manual page 27

Part 5 PROGRAMMING MODE -
8 8
Special priced dryer cycle time
Entering set up mode.
You will see LqC1
Note
• CCCC (washing time) is not available in dryer.
• nrPC (rinsing times per cycle) is not available in dryer.
• rt (rinsing time setup) is not available in dryer.
• tSSd (top spin speed) is not available in dryer.
Press the High Temp. button.
Press the Med Temp. or the Low Temp.
button until appears in the display.
Press the Start button.
Press the Med Temp. or the Low Temp.
button until appears in the display.
Press the Start button.
Display previous special priced dryer cycle time.
Press Med Temp.(+) or Low Temp.(-) button to select time
between 10 and 99.
Press the Start button.
The machine sets up the special priced dryer cycle time, then
advances to the next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• Stack type - 1. Control panel open.
2. Turn on/off toggle switch.
Setup Mode
Button Display
2 7