LG GD1329CES Owner's Manual page 32

Part 5 PROGRAMMING MODE -
1 1 3 3
Beep volume
Entering set up mode.
You will see LqC1
3 2
Press the High Temp. button
Press the Med Temp. or the Low Temp.
button until appears in the display.
Press the Start button.
Press the Med Temp. or the Low Temp.
button until appears in the display.
Press the Start button.
Display previous value.
Press Med Temp.(+) or Low Temp.(-) button to select High or
Low or Off.
Press the Start button.
The machine sets up the beep volume, then advances to the
next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• Stack type - 1. Control panel open.
2. Turn on/off toggle switch.
• OPL type - Push "High Temp." + "Low Temp."
and the '3'.
Setup Mode
Button Display