LG GD1329CES Owner's Manual page 33

Part 5 PROGRAMMING MODE -
1 1 4 4
Time to keep the coin (Use only for coin type)
Entering set up mode.
You will see LqC1
Press the High Temp. button
Press the Med Temp. or the Low Temp.
button until appears in the display.
Press the Start button.
Press the Med Temp. or the Low Temp.
button until appears in the display.
Press the Start button.
Display previous value.
Press Med Temp.(+) or Low Temp.(-) button to select time
between 1 ~ 180 or 'Disable'.
Press the Start button.
The machine sets up the time to keep the coin, then advances
to the next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• Stack type - 1. Control panel open.
2. Turn on/off toggle switch.
Setup Mode
Button Display
3 3