Epson ActionNote 866C User Manual page 50

CSALLOC utility
CSALLOC is an MS-DOS program that scans the system for
available memory, I/O port, and IRQ resources each time you
start your system and maintains the information it collects in a
file called CSALLOC.INI. You need to run CSALLOC only if
you want to display the available system resources if you've
changed port, IRQ, or memory settings on your system. You
should also run CSALLOC when you install new hardware or
software that requires specific system resources so that
CardSoft does not use the resources instead.
You must run CSALLOC from the MS-DOS prompt; you
cannot run it from within Windows. Type CSALLOC
Enter
press
you can use.
Note
Remove any PC cards from the PCMCIA slots before you
run the CSALLOC utility.
CARDINFO Utility
The CARDINFO utility provides various types of information
about your PC cards and slots. You can run CARDINFO from
the MS-DOS prompt or from the MS-DOS icon within
Windows. Log onto the C:\CARDSOFT directory, type
CARDINFO
command switches you can use.
to see a list of the CSALLOC command switches
Enter
/?, and press to see a list of the CARDINFO
Using Your Computer
and
/H
2-15