Epson ActionNote 866C User Manual page 74

Follow these steps to install a PC card:
1. Open the door covering the PC card bay on the left side of
your computer.
2. Hold the PC card so the 68-pin connector on the edge of the
card faces the PC card slot and the card's label faces up.
3. Align the card in the card guides of the appropriate slot.
Then push the card gently but firmly into the slot as far as it
will go. (Part of the card extends from the slot.) When you
feel resistance, stop pushing; do not force it into the slot.
When you have fully inserted the card, the release
button on the side of the slot pops out slightly. The button
on the left is for the upper slot; the one on the right is for
the lower slot.
release buttons
Installing Optional Devices 4-5