Installing Additional Pc Card Drivers And Utilities - Epson ActionNote 866C User Manual

If you use Instant On or the Low Battery Save to HDD options,
the PCMCIA services are not reinitialized. In this case, your
computer recognizes SRAM PC cards, but does not recognize
most other PC cards, such as fax/ modem or LAN PC cards. To
reinitialize the services, exit any application programs you are
using and exit Windows. Then press
computer.

Installing Additional PC Card Drivers and Utilities

While the ActionNote is fully compatible with PCMCIA
version 2.1 and JEIDA 4.1, some PC cards (such as LAN cards)
require that you install special drivers or software before the
card works correctly. For example, a LAN card may require
you to install a socket services enabler either as a device driver
or command that is executed when you load the network
operating system.
See the documentation that came with your PC card to see if
you need to install any special drivers. You can obtain the latest
information on available PC card drivers by checking the
Epson America Forum on CompuServe. See "Where to Get
Help" in the Introduction to this manual for information about
connecting to the Epson America Forum.
Ctrl Alt Del
to reboot your
Using Your Computer 2-21