Automatic Features - Epson ActionNote 866C User Manual

The three power-saving modes are summarized in the
following table:
Power-saving operations
Mode
System
Idle
System
Standby
System
Suspend
You can enable any or all of these power-saving modes by
using a combination of automatic and manual features, as
described in the next section.

Automatic Features

Using the Power Management screen in Setup, you can set
individual system inactivity time periods, at the end of which
your computer will automatically enter the selected
power-saving mode. You can access the Power Management
screen in two ways:
When you start your computer, run Setup and press
to display the screen.
Press
Entered when...
CPU is not used
System is not
used for set
period of time
System inactivity
continues for
next set period
Fn F8
at any time.
Description
CPU clock speed
reduced
CPU speed further
reduced: LCD
backlight turned
off: HDD and other
components in low
power states
CPU clock stops:
LCD and HDD
turned off: other
components
suspended
Powering the Computer
Exited
When CPU is
required: full system
performance
immediately
Any system use or
fax/modem ring: full
performance in a
few seconds
Fax/modem ring:
Resume button: full
performance in 15
seconds
P g D n
3-7