Hitachi PC-ARFG2-Z Installation & Maintenance Manual page 24

7. Input/Output Setting
7. Input/Output Setting
Set Input/output from the Installation Menu. Please refer to Table B and Table C for details on each input setting.
1. Set Input/Output
Step1. Select "Installation Menu" on the Service & Installation
screen and press "OK" .
Step2. Select "Input/Output" setting and press "OK".
Step3. Press "OK".
Step4. Select the indoor unit by pressing " ", " ", " ", or " " and
press "OK".
(This screen is NOT displayed when only one indoor unit
is connected with the controller. In this case, "Step4" is
displayed.)
Step5. Press " " or " " to select the item.
Step6. Press " " or " " to change the setting.
Step7. Press "OK" and the confirmation screen is displayed.
Step8. Select "Yes" and press "OK" to confirm the setting and the
screen returns to Step2.
If "Cancel" is selected, the setting is cancelled and the
screen returns to Step2.
If there is more than one indoor unit connected to the
remote controller, the screen returns to Step3.
Press " " to return to Step4.
A16381H9HF
Service & Installation
Service Menu
Installation Menu
Check Menu
Select
OK
Installation Menu
Test Run
Function Selection
Thermistor Selection
Input/Output
Thermistor Calibration in Controller
Select
OK
Installation Menu
Test Run
The displayed explanation is for
Function Selection
reference only. For details on each input/
output setting, refer to the technical
Thermistor Selection
manual of each unit.
Input/Output
OK
Thermistor Calibration in Controller
OK Select
Input/Output
ALL
00-00
00-01
00-02
OK Select
Indoor unit number
(Refrigerant system number
—Address number)
Input/output : ALL
00: Not set
Item Setting
Input 1
00: Not set
Input 2 00: Not set
Output 1 00: Not set
Output 2 00: Not set
Output 3 00: Not set
OK Select
Input/Output
Item Setting
Input 1
03
Update setting of input/output?
Input 2 08
Output 1 08
Yes Cancel
Output 2 08
Output 3 06
OK OK Select Enter
(Mon) 16:30
Back
(Mon) 16:30
Back
(Mon) 16:30
Back
Back
Connector
CN3 1-2
CN3 2-3
CN7 1-2
CN7 1-2
CN8 1-2
Back
Connector
CN3 1-2
CN3 2-3
CN7 1-2
CN7 1-2
CN8 1-2
Back Back
21