Adding Oil To The Engine - Toro 58610 Operator's Manual

2. Install a rear wheel to both sides of the machine.
Figure 11
1. Rear axle
2. Axle spacer
g384420
3. Rear wheel
4. Locknut (M10)
4

Adding Oil to the Engine

Parts needed for this procedure:
1 Engine oil
Procedure
1. Move the machine to a level surface.
2. Remove the dipstick.
1. Filler tube
2. Dipstick
3. Slowly add oil into the filler tube until the level is
at the top thread of the tube.
4. Insert the dipstick into the oil-fill tube and tighten
it.
10
Figure 12
3. Upper limit
4. Lower limit
g360549