Table of Contents
Advertisement
Engine Maintenance
Servicing the Air Cleaner
Service Interval: Every 25 hours
1.
Refer to
Preparing for Maintenance (page
2.
Remove the air-cleaner cover.
Figure 17
1. Air-cleaner cover
2. Air-cleaner element (2)
3.
Remove and inspect the air-cleaner elements.
4.
Inspect the air-cleaner elements.
5.
Replace any torn or worn element. Otherwise,
clean each element as follows:
A.
Wash the element with warm water and a
mild detergent.
Important:
washing it; do not twist it.
B.
Dry the element by pressing it in a clean
cloth.
C.
Thoroughly oil the foam element using new
engine oil and press out any excess oil.
6.
Install the elements, screen, and air-cleaner
cover to the base.
3. Air-cleaner screen
4. Air-cleaner base
Press the element when
Servicing the Engine Oil
Engine-Oil Specifications
Engine oil capacity
Oil viscosity
17).
API service classification
Important:
g360561
Checking the Engine-Oil Level
Service Interval: Before each use or daily
1.
Move the machine to a level surface.
2.
Remove the dipstick.
1. Filler tube
2. Dipstick
3.
Wipe the dipstick clean with a clean cloth.
4.
Insert the dipstick into the oil-fill tube and tighten
it.
5.
Remove the dipstick and check the engine-oil
level.
6.
If the oil level is low, slowly add oil into the filler
tube until the level is at the top thread of the
tube.
7.
Insert the dipstick into the oil-fill tube and tighten
it.
18
0.35 L (11.8 fl oz)
Refer to the chart below.
SJ or higher
Figure 18
Do not use SAE 10W-40 Motor Oil.
Figure 19
3. Upper limit
4. Lower limit
g360560
g360549
Advertisement
Table of Contents
