Table of Contents
Advertisement
Product Overview
1. Throttle control
2. Choke lever
3. Starter handle
4. Depth-control lever
Controls
Engine On/Off Switch
Use the engine on/off switch to shut the engine off.
Ensure that the switch is in the O
starting the engine.
Throttle Control
The throttle controls the engine and edger blade
speed, and it has a continuous-variable setting.
Operate the machine using full throttle for best
performance.
Figure 13
position before
N
11
5. Fuel cap
6. Engine on/off switch
7. Cutter head
8. Angle-adjustment lever
Choke Lever
Move the choke lever on the engine to the C
position when initially starting a cold engine, then
move it into the R
position once started.
UN
Depth-Control Lever
Use the depth-control lever to adjust the depth of cut.
Move it forward to cut deeper into the soil.
g385129
HOKE
Advertisement
Table of Contents
