Control Panel - Electrolux ED7W3964LV User Manual

12 www.electrolux.com
Make sure that the drain hose makes a
loop to prevent particles going into the
appliance from the sink.
1
ø16
Connect the drain hose to the spigot and
tighten it with a clamp. Make sure that
the drain hose makes a loop to prevent
particles going into the appliance from
the sink.
5. Position the hose directly to a built-in
drain pipe in the room wall and tighten it
with a clamp.

6. CONTROL PANEL

6.1 Special features
Your new washer-dryer meets all modern
requirements for effective treatment of
laundry with low water, energy and
detergent consumption and detergent
consumption and proper care of fabric.
• SteamCare system, thanks to Vapor
Refresh steam programme, offers the
perfect solution for refreshing even
the most delicate garments without
2
W011
5.3 Electrical connection
At the end of installation you can connect
the mains plug to the mains socket.
The rating plate and the 'Technical Data'
chapter indicate the necessary electrical
ratings. Make sure that they are
compatible with the mains power supply.
Check that your domestic electrical
installation can take the maximum load
required, also taking into account any
other appliances in use.
Connect the appliance to an earthed
socket.
The power supply cable must be easily
accessible after installing the appliance.
For any electrical work required to install
this appliance, contact our Authorised
Service Centre.
The manufacturer does not accept any
responsibility for damage or injury
through failure to comply with the above
safety precaution.
washing. Use the delicate fragrance
exclusively developed by
ELECTROLUX to add a pleasant
feeling of "just-washed" garment to
the removing odours and wrinkles
action.
• The UniversalDose drawer with a
compartment dedicated to each type
of detergent, including a compartment
for Pods®, equipped with a system
able to spread and mixing the