Electrolux ED7W3964LV User Manual page 40

Table of Contents

Advertisement

40
www.electrolux.com
16.4 Descaling
If the water in your area is
hard or medium hard, we
recommend that you use a
water softener for washing
machines.
Regularly examine the drum to check for
limescale.
Regular detergents already contain water
softening agents, but we recommend to
run a cycle with an empty drum and a
descaling product.
Always follow the
instructions that you find on
the packaging of the
product.
16.5 Maintenance wash
The repeated and prolonged use of low
temperature programmes can cause
detergent deposits, fluff residues,
bacterial growth inside the drum and the
tub. This could generate bad odours and
mildew. To eliminate these deposits and
clean the inner part of the appliance, run
a maintenance wash regularly (at least
once a month).
Refer to "Cleaning the drum"
paragraph.
16.6 Door seal with double lip
trap
This appliance is designed with a self
cleaning draining system, allowing light
fluff fibers that fall off the clothes to be
drained out with the water. Regularly
examine the seal. Coins, buttons, other
small items can be recovered at the end
of the cycle.
Clean it when needed, using ammonia
cream cleanser agent without scratching
the seal surface.
Always obey the instructions
that you find on the
packaging of the product.
Check and remove objects (if there are
any) that could be trapped in the fold.
Make sure that no laundry remains
between the seal and the door.
Use a moist cloth to wipe off any dirt or
water residue left behind in the door seal
after completion of program cycle.
16.7 Cleaning the drum
Regularly examine the drum to prevent
unwanted deposits.
Rust deposits in the drum may occur due
to rusting foreign body in the washing or
tap water containing iron
Clean the drum with special products for
stainless steel.
Always follow the
instructions that you find on
the packaging of the
product.
Do not clean the drum with
acidic descaling products,
scouring products containing
chlorine or iron or steel wool.
For a thorough clean:
1. Remove all laundry from the drum.
2. Run the Limp. Máquina programme.
For more details, refer to washing
programme table.
3. Add a small quantity of powder
detergent into the empty drum, in
order to rinse out any left residues.
Occasionally, at the end of a
cycle the display may show
the icon
: this is a
recommendation to perform
the "drum cleaning". Once
the drum cleaning has been
performed, the icon
disappears.

Advertisement

Table of Contents
loading

Table of Contents