Table of Contents
Advertisement
Programme
Reference
Default tem‐
spin
perature
speed
Temperature
Spin
range
speed
range
1200 rpm
(1200 -
Limp. Máquina
400 rpm)
60 °C
1600 rpm
(1600 -
Centrif./Drenar
400 rpm)
1600 rpm
(1600- 400
Aclarado/
rpm)
Enxag.
Jeans
1200 rpm
30 °C
1200 rpm -
40 °C - Cold
400 rpm
Maxi‐
Programme description
mum
(Type of load and level of soiling)
load
Maintenance cycle with hot water to clean and
freshen the drum and to remove residue that
may cause odour. For the best result use this
cycle once a month. Before running this cycle,
remove all items from the drum. In the wash‐
ing phase compartment of the detergent dis‐
penser, put the flap of the compartment in up‐
ward position. Pour a cup of chlorine bleach
or a washing machine cleaner in the washing
phase compartment. DO NOT use both to‐
-
gether.
After the drum cleaning, run a fur‐
ther rinse cycle with empty drum
and no detergent to remove any
residue of bleach.
If you set this programme with the Modo - Se‐
car, the appliance performs the anti-fluff ac‐
tion. Refer to chapter 'Fluff in the fabrics'.
9 kg
All fabrics, except woollens and delicate
fabrics. To spin the laundry and to drain the
water in the drum.
9 kg
All fabrics, except woollens and very deli‐
cate fabrics. Programme for rinsing and spin‐
ning the laundry. The default spin speed is the
one used for cotton programmes. Reduce the
spin speed according to the type of laundry. If
necessary, set the Extra Rinse option to add
rinses. With a low spin speed, the appliance
performs delicate rinses and a short spin.
4 kg
Denim clothing and jersey items. Normal
soiled. This programme performs a gentle
rinsing phase, designed for denim, that re‐
duces fading and does not cause washing
powder residues on the fibres.
ENGLISH
21
Advertisement
Table of Contents
