Electrolux ED7W3964LV User Manual page 34

34 www.electrolux.com
for running a complete wash&dry
programme.
Proceed as follows:
1. After loading laundry and detergent,
press the On/Off button for some
seconds to activate the appliance.
2. Load the laundry one item at a time.
3. Put the detergent and the additives in
the appropriate compartment.
4. Turn the programme dial to the
washing programme. The appliance
defaults to the washing only mode
and the indicator of the Modo - Lavar
button is on. The display shows the
default temperature and spin. If
necessary, change them according to
your laundry. The display also shows
the maximum recommended load for
washing phase.
5. Set the desired options, if there are
available.
6. Tap on the Modo - Secar button to
activate also the drying function. Both
indicators of the Modo - Lavar and
Modo - Secar buttons are on. The
indicators
display. The display also shows the
maximum recommended load for a
washing and drying programme (e.g.
6 kg for cottons).
12.2 Washing and Drying -
Automatic levels
1. Tap on the Auto Dry button
repeatedly until the display shows the
required dryness level. The indicators
in the display illuminate accordingly:
a.
b.
synthetic items;
c.
The time value on the display is the
duration of both cycles washing and
drying, calculated on a default load
size.
To have a good drying by
using less energy and in a
shorter time, the appliance
does not let you set a too
low spin speed for the items
to be washed and dried.
and appear on the
Iron dry: for cotton items;
Cupboard dry: for cotton and
Extra dry: for cotton items.
2. Touch button Inicio/Pausa
start the programme. The SensiCare
estimation starts.
In the display the door locked
indicator comes on.
The display also shows the remaining
programme time.
12.3 Washing and Timed
Drying
1. Tap on the Tiempo/Tempo sec.
button repeatedly to set the desired
time value (see the "Timed drying"
table in the "Programmes" chapter).
The drying level indicator
and the indicator
Each time you tap on this button the time
value increases by 5 minutes. The
display shows the set new time value.
2. Touch the Inicio/Pausa
start the programme. The SensiCare
estimation starts.
In the display the door locked
indicator comes on.
The display also shows the remaining
programme time.
12.4 At the end of the drying
programme
• The appliance stops automatically.
• The acoustic signals operate (if they
are active).
• In the display
• The indicator of the Inicio/Pausa
button goes off. The door locked
goes off.
The appliance continues to operate
with the anti-crease phase for
approximately 30 minutes or more if
Anti-crease option was set.
The anti-crease phase reduces
creasing.
You can remove the laundry before
the anti-crease phase is completed.
We recommend, for better results,
that you remove the laundry when the
phase is almost completed or
completed. The indicator
lit.
to
goes off
comes on.
button to
comes on.
remains