Table of Contents
Advertisement
EN 10
4.
EJ3.0U PA
4.3.7
Power Supply Board
The PSU belongs to the PDP panel. Please refer to the PDP
repair manual for more info.
4.3.8
Interconnection Board [M]
1. Unplug all connectors. Carefully unplug the LVDS
connector as it is very fragile.
2. Remove the fixation screws [1].
3. Take out the panel.
Figure 4-10 Interconnection board
4.3.9
Small Signal Board [B]
1. Unplug all connectors. Carefully unplug the LVDS
connector as it is very fragile.
2. Remove the fixation screws [1] from the connector plate.
3. Remove the fixation screws [2].
4. Take out the panel.
1
1
Figure 4-11 Small Signal Board
4.3.10 PDP Panel
1. Refer to figures "PDP panel" below.
2. Unplug all connectors to/from the panels inside the "SSB
tray".
3. Remove T10 Tapping screws [1] and T10 Parker screws
[2], and remove the metal "SSB tray" (incl. panels) from the
set.
Mechanical Instructions
1
H_17000_007.eps
260207
2
1
1
H_17000_006.eps
260207
4. You now view the PDP boards, as shown in fig. "PDP panel
[2/3]" below.
5. Remove fixation screws [3] and lift the complete PDP (incl.
the boards and wiring) by means of the mounting brackets
[4] from the set. Note: Remove these brackets [4] before
returning the defective PDP.
2
1
1
1
Figure 4-12 PDP panel [1/3]
Figure 4-13 PDP panel [2/3]
4
3
Figure 4-14 PDP panel [3/3]
1
1
H_17000_008.eps
260207
H_17000_009.eps
260207
4
H_17000_015.eps
280207
Advertisement
Table of Contents
