Toro 133-2861 Installation Instructions

Wire Harness Update Kit
2013 and After Multi Pro
Finishing Kit
Model No. 133-2861
This product contains a chemical or chemicals known to the State of California to
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
1
Installing the Kit
No Parts Required
Procedure
1. Park the machine on a level surface, set the parking
brake, shut off the engine, and remove the key from
the ignition switch.
2. Disconnect the negative (-) battery cable from the
battery.
3. Remove the 5 bolts from the right panel on the control
console, then remove the panel
© 2016—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Proposition 65 Warning
cause cancer, birth defects, or reproductive harm.
Description
No parts required
(Figure 1).
Register at www.Toro.com.
® 5800 Turf Sprayer Ultra Sonic Boom
WARNING
CALIFORNIA
Qty.
–
1. Left actuator switch
2. Right actuator switch
Form No. 3405-190 Rev A
Installation Instructions
Use
Install the kit.
Figure 1
3. Right panel
4. Bolt
Original Instructions (EN) All Rights Reserved *3405-190* A
Printed in the USA
™