Table of Contents
Advertisement
Fine-adjustment of Auto-Equalizer
Curve Gi)
in PRO mode, the user can fine-adjust the
create auto-equalizer curve consisting of 4-
band parametric euqlaizer curve.
It is possible to select 4 bands (4 center
frequencies) between 80 Hz and 20 kHz
from 25 frequencies and adjust the level of
each band. The O factor (inclination of the
equalizer curve) of each frequency band
can be selected separately.
QO factor
Set values: 1.2 or 2.6 dB/oct.
The greater the value, the sharper the
equalizer curve characteristics.
Level (dB)
Center
Frequency
—
frequency
Hz)
Fine-adjustment of Auto-equalizer
Curve
1. Press and hold button [2] for more than
2 seconds to switch to auto-equalizing
mode.
ti (tt Hl tt ti] tt
ica
x 'wavan
Wi
nN
|
2. Press button [10] to switch to the auto-
equalizer curve fine-adjustment mode.
(The currently selected band blinks.)
3. Press the hold (<4) or () side of buttons
[5] for more than 2 seconds to select the
band to be fine-adjusted.
(The selected band blinks.)
4. Press (<4) or () side of buttons [5] to
select the frequency to be fine-adjusted.
(Numeric display [17] shows "80 Hz —
20 kHz".)
*
tis not possible to set 2 adjacent bands
at an interval of less than 1 octave.
. Press (&) or (W) side of buttons [6] to
adjust the level.
(Numeric display [17] shows "-10 dB —
6 dB".)
2
. Press (F4) of buttons [9] to set the O
factor (inclination of the equalizer
curve).
Each press of the button alternates
"4.2" and "2.6".
(Numeric display [17] shows "1.2" or
ues)
Shoe oases
ee
Ss
felt 3
. Adjust other bands.
Repeat steps 3 to 6 for each band so
that the desired tone can be obtained.
. Press button [2] to quit the auto-
equalizing mode.
Advertisement
Table of Contents
