2, How to display the error codes that were previously detected
This unit memorizes the error code in electrically erasable/programmable ROM (EEPROM) when an internal problem is detected.
(However, error code 9X-XXX is excluded.)
The error codes of the detected problems are displayed.
'The procedures of displaying the error codes are as follows:
1. Press the MENU button while pressing the [=] button.
MAINTENANCE
NMENI
MENU DATA CONTROL
EDIT
C
SERVO
CHEC!
SERVO
ADJUST
SERVIC!
OTHERS
2. Set the cursor to SERVICE SUPPORT with the [t ]or [7
button,
Then, press the[—>] button.
MANUAL EJECT