JVC GR-DVL100U Manual page 19

ToDV ToPC
IN/OUT (DIGITAL
PHOTO)
Core filter
DV cable
(optional)
PC connection |
cable (provided) |
Core filter
ToDv
connector
PLAYBACK Advanced Connections
Connection To A Personal
Computer
This camcorder can transfer still images to a PC by using
the provided software when connected as shown in the
illustration. It is also possible to transfer still images to a PC
with a DV connector-equipped capture board installed.
1 Make sure the camcorder and PC are turned off.
69] Connect the camcorder to your PC using the
appropriate cable as shown in the illustration.
Tur the camcorder's Power Switch to " G I " while
pressing down the Lock Button located on the switch
and turn on the PC.
NOTES:
© It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the battery pack
( pg. 9).
© Never connect the PC connection cable and the DV
cable simultaneously to the camcorder. Connect only
the cable you wish to use to the camcorder.
@ The date/time information cannot be captured into the
PC.
'© Refer to the instruction manuals of the provided
Software.
@ Also refer to the manufacturer's instruction manual for
the DV connector-equipped capture board.
'© When using a DV cable, be sure it has a core filter
attached. The core filter reduces interference.
To DV IN/OUT
Core filter-
DV cable
(optional)
Core
To DVIN
Topv
iuanector, connector
| +
'Video unit equipped with
a DV input connector
To RS-232C
Connection To A Video Unit Equipped With
A DV Connector
Connection to the GV-DT3 Digital Printer (optional) allows
you to print out images or transfer them to a PC. Its also
possible to copy recorded scenes from the camcorder onto
another video unit equipped with a DV connector. This
function is called Digital Dubbing (€¥ pg. 39), which
offers virtually no image or sound deterioration.
Bf Make sure all units are tuned off
'Make connections to the device you want to connect
to using a DV cable, as shown in the illustration.
tf necessary, connect the PC connection cable i |
(provided) to the printer's PC connector and the PC's
RS-232C connector.
Turn the camcorder's Power Switch to while
pressing down the Lock Button located on the switch
and turn on the other units.
NOTE!
© It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the battery pack
(CF pg. 9).
© For Digital Dubbing, this camcorder can be connected
only to one device at a time. This camcorder can also be
used as a recorder (F pg. 39).
© If Stll Playback, Slow-Motion Playback, Fast-Forward or
Rewind is attempted with the camcorder connected to a
video unit via the DV connector, the image will take on
an effect similar to a colored mosaic pattern or it will
become black.
© Also refer to the instruction manuals of the connected
units.
© When using a DV cable, be sure it has a core filter
attached. The core filter reduces interference.