JVC GR-DVL100U Manual page 22

Zoom Buttons-
SHIFT
Left or SLOW —!
Rewind Button
Up Button
Down
Button
PLAY
PAUSE
STOP Right or SLOW:
Forward Button
'Normal playback
SHIFT he
FEATURE: Playback Zoom
AE REMOTE CONTROL UNIT (cont.)
FEATURE: Slow-Motion Playback
|
|
|
|
|
|
To allow slow-speed search in either direction during
playback.
OPERATION:
1) To change from normal to Slow-Motion Playback,
press PAUSE (IB) to engage Still Playback then press
SLOW (<1 or +) more than approx. 2 seconds. After
approx. 1 minute in Slow Rewind or approx. 2
minutes in Slow Forward, normal playback resumes.
To stop Slow-Motion Playback, press PLAY (>).
NOTES:
© During Slow-Motion Playback, due to digital image
processing, the picture may take on a mosaic effect.
© After SLOW (4 or ) is pressed and held, the still
image may be displayed for a few seconds,
followed by a blue screen for a few seconds. This is
not a malfunction.
© There may be a small margin between the slow-
motion playback start point you chose and the
actual start point for Slow-Motion Playback.
© During Slow-Motion Playback, there will be
disturbances in video and the picture may seem
unstable, especially with steady images. This is not
a malfunction.
'© During Slow-Motion Playback, press PAUSE (11) to
pause playback.
FEATURE: Frame-By-Frame Playback
PURPOSE:
To allow frame-by-frame search during playback. |
OPERATION: |
1) To change from normal to Frame-By-Frame Playback, |
|
press PAUSE (IH) to engage Still Playback then press
SLOW (1+) repeatedly for forward or SLOW (+t)
repeatedly for reverse. Each time itis pressed, the
frame is played back.
PURPOSE:
OPERATION:
PLAY (>).
NOTES:
'To magnify the recorded image up to 25X at any time during playback.
1) Press PLAY (?) to find the scene of interest.
2) Press the Zoom Buttons (T/W) on the remote control. Make sure the remote control is pointed at the
camcorder's remote sensor. Pressing T zooms in.
3) You can move the image on screen around to find a particular portion of the picture. While holding
down SHIFT, press Ej (Left), £3 (Right), FY (Up) and &@ (Down).
8 To end zoom, press and hold W until magnification returns to normal. Or, press STOP (Ml) and then press
# Zoom can also be used during slow-motion and stll playback.
© Due to digital image processing, the quality of the image may suffer.
ORF
EFFECT
ig us
PLAYBACK
EFFECT Select
Menu
FEATURE: Playback Special Effects
n43
PURPOSE:
To allow you to add creative effects to the playback
image.
OPERATION:
1) To start playback, press PLAY (»).
2) Point the remote control at the camcorder's remote
sensor and press EFFECT. The PLAYBACK EFFECT
Select Menu appears.
3) Move the highlight bar to the desired effect by
pressing EFFECT. The selected function is activated
and after 2 seconds the menu disappears.
To deactivate the selected effect, press EFFECT ON/
OFF on the remote control. Pressing it again re-
activates the selected effect.
To change the selected effect, repeat from step 2
above.
NOTES:
'© When some Playback Special Effects are used, the
'Multi-Analyzer 4 and Multi-Analyzer 9 Snapshot
modes (C7 pg. 17) are not available.
© The effects that can be used during playback are
Classic Film, Monotone, Sepia, Strobe and Video
Echo. The effects work the same in playback as they
did in recording. Refer to page 28 for more
information.