Jumper Settings (On Main Board (G-780009 Board)) - NEC 78K/0 Series User Manual

3.3 Jumper Settings (on Main Board (G-780009 Board))

(1) Default jumper settings
Figure 3-8. Default Settings of JP2, JP3, JP4, JP6, JP7, and JP8
1 2
JP2
1 2
JP3
1 2
JP4
JP8: Selection of the subsystem clock source (default setting: 1 and 2 shorted)
1 and 2 shorted:
3 and 4 shorted:
Caution Jumper settings differ depending on the emulation board. For details, refer to the
relevant emulation board user's manual.
CHAPTER 3 INSTALLATION
3 1
2
3 1
2
3
Internal (mounted on the emulation board or mounted on the part board by
the user)
External (input via an emulation probe from the target system)
User's Manual U13731EJ3V0UM
3 5
4 6
JP6
3 5
4 6
JP8
1 3 5
2 4 6
JP7
33