Appendix D Interface Board (Ie-70000-Pc-If-C) For Ibm Pc/At Compatibles; Introduction - NEC 78K/0 Series User Manual

APPENDIX D INTERFACE BOARD (IE-70000-PC-IF-C) FOR IBM PC/AT COMPATIBLES

This chapter describes the setting method when connecting the IE-78K0-NS.
For details, refer to the IE-70000-PC-IF-C User's Manual (to be prepared).
D.1 Introduction
The IE-70000-PC-IF-C is an interface board for IBM PC/AT compatibles that is installed in the ISA bus slot of an
IBM PC/AT compatible.
First of all, check that you have the correct interface board.
• Interface board (IE-70000-PC-IF-C) for IBM PC/AT × 1
<Basic specifications>
Applicable models
The IE-70000-PC-IF-C is designed for IBM PC/AT compatibles incorporating an ISA bus.
Hardware resources
• I/O address.................. 16 bytes at any 16-byte boundary (020×H to 03F×H)
• Interrupts and others ... Unused
Current consumption
500 mA (MAX. when using +5 V)
Cautions 1. Do not place heavy objects on or apply pressure to the board.
2. Do not drop the board or subject it to excessive vibration or shock.
3. When removing a cable, do not pull it by the cord.
4. Do not use or keep the board in a hot, humid or dusty environment or in a location where it
is directly exposed to sunlight.
5. Avoid subjecting the board to extreme changes in temperature or humidity.
6. Do not spill drinks or other liquids onto the board or its accessories.
7. Do not connect a cable for a different product to the connector.
User's Manual U13731EJ3V0UM
43