NEC 78K/0 Series User Manual page 25

(2) Connecting performance board (IE-78K0-NS-PA) and emulation board (IE-780×××
The IE-78K0-NS-PA and IE-780×××-NS-EM1 are sold separately.
Figure 3-2. Connecting Performance Board and Emulation Board (IE-780×××
<1> Remove the screws from the sides of the
main unit, and then remove the top cover.
<3> Connect the IE-78K0-NS-PA and affix the
attached spacers to the IE-78K0-NS-PA at
five points on the board.
Attached
spacer
Fix
<5> Connect the IE-78×××-NS-EM1 on the IE-
78K0-NS-PA and fasten the two screws.
CHAPTER 3 INSTALLATION
<2> Remove the first and second plates from the
<4> When only connecting the IE-78018-NS-EM1
Attached
spacer
Fix
Here
IE-78K0-NS-PA
<6> When using a probe, connect the probe.
IE-780×××-NS-EM1
IE-78K0-NS-PA
User's Manual U13731EJ3V0UM
×××-NS-EM1) ××× ×××
×××-NS-EM1) (1/2)
××× ×××
bottom by removing the screws.
on the IE-78K0-NS-PA, remove spacer 1
(metal) of the following figure and replace
spacers 2 and 3 (metal) with the attached
spacers (plastic).
Spacers 2 and 3
Refer to (5) for the probe
connection method.
Refer to the IE-78K0-NS-PA
User's Manual for the
EXT cable connection method.
Spacer 1
25