NEC 78K/0 Series User Manual page 28

(4) Connecting performance board (IE-78K0-NS-PA), I/O board (IE-78K0-NS-P0× × × × ) and emulation board (IE-
×××-NS-EM1 and IE-78K××× ××× ×××
780×××
The IE-78K0-NS-PA, IE-78K0-NS-P0×, and IE-780×××-NS-EM4 are sold separately.
Figure 3-4. Connecting Performance Board, I/O Board and Emulation Board (1/2)
<1> Remove the screws from the sides of the
main unit, and then remove the top cover.
<3> Connect the IE-78K0-NS-PA and affix the
attached spacers to the IE-78K0-NS-PA at
five points on the board.
Attached
spacer
Fix
<5> Connect the IE-780×××-NS-EM4 on the IE-
78K0-NS-P0×, and fasten the screws at the
four corners.
28
CHAPTER 3 INSTALLATION
×××-NS-EM4) ××× ×××
Attached
spacer
Fix
Here
IE-78K0-NS-PA
IE-78×××-NS-EM4
IE-78K0-NS-P0×
IE-78K0-NS-PA
User's Manual U13731EJ3V0UM
<2> Remove the first and third plates from the
bottom by removing the screws.
<4> Connect the IE-78K0-NS-P0× on the IE-
78K0-NS-PA, and fix the spacers to the IE-
78K0-NS-P0× at the four corners.
Attached
spacer
Fix
<6> When using a probe, connect the probe.
Refer to (5) for the probe
connection method.
Refer to the IE-78K0-NS-PA
User's Manual for the
EXT cable connection method.
Attached
spacer
Fix
IE-78K0-NS-P0×
IE-78K0-NS-PA