Appendix B Pc Card Interface (Ie-70000-Cd-If-A); Introduction - NEC 78K/0 Series User Manual

APPENDIX B PC CARD INTERFACE (IE-70000-CD-IF-A)

This chapter describes the setting method when connecting the IE-78K0-NS.
For details, refer to the IE-70000-CD-IF-A User's Manual (to be prepared).
B.1 Introduction
The PC card interface (IE-70000-CD-IF-A) is an interface card for an IE product that is installed in a PC PCI bus
slot compliant with PCMCIA2.1/JEIDA standard Ver. 4.2.
Check that you have the following items.
• PC card interface (IE-70000-CD-IF-A) × 1
• MC-A CABLE × 1
• NS-A CABLE × 1
• User's manual × 1
• DLL-DISK × 1
• DRV-DISK × 1
<Basic specifications>
Hardware resources used
• I/O address .........20 bytes starting from 220H, 260H, 2E0H, 320H, or 3E0H as a base address
• Interrupts ............Unused
• Memory...............Unused
Current consumption
300 mA (MAX. when using +5 V)
Cautions 1. Do not place heavy objects on or apply pressure to the board.
2. Do not drop the board or subject it to excessive vibration or shock.
3. When removing a cable, do not pull it by the cord.
4. Do not use or keep the board in a hot, humid or dusty environment or in a location where it
is directly exposed to sunlight.
5. Avoid subjecting the board to extreme changes in temperature or humidity.
6. Do not spill drinks or other liquids onto the board or its accessories.
7. Do not connect a cable for a different product to the connector.
38
User's Manual U13731EJ3V0UM