Usg6510E-Poe - Huawei USG6000E Series Quick Start Manual

HUAWEI USG6000E Series Quick Start

2.2 USG6510E-POE

Device and Auxiliary Materials
Figure 2-3 Appearance and auxiliary materials of the USG6510E-POE
Cable Connection
Connect cables according to
not provide a power switch, it starts up immediately after receiving power. When
the SYS indicator on the frontpanel is blinking (once every two seconds), the
device is running and ready for configuration.
The PoE power supply device must be directly connected to the firewall through a
network cable. For details about PoE power supply parameters, see the
Configuration Guide .
Issue 02 (2022-08-22)
NO TE
● The mounting ears are optional.
● The power cable varies according to the delivery country.
Copyright © Huawei Technologies Co., Ltd.
2 Device Introduction and Cable Connection
Figure 2-4 and power on the device. As device does
7