LG MEDIA STATION MS400H Owner's Manual page 20

Network twin hd recorder
Table of Contents

Advertisement

Notes on Network Connection
Many network connection problems during set up can
l
often be fixed by re-setting the router or modem.
After connecting the recorder to the home network,
quickly power off and/or disconnect the power cable of
the home network router or cable modem. Then power
on and/or connect the power cable again.
Depending on the internet service provider (ISP), the
l
number of devices that can receive internet service
may be limited by the applicable terms of service. For
details, contact your ISP.
Our company is not responsible for any malfunction of
l
the recorder and/or the internet connection feature due
to communication errors/ malfunctions associated with
your broadband internet connection, or other connected
equipment.
Some internet contents may require a higher bandwidth
l
connection.
Even if the recorder is properly connected and
l
configured, some internet contents may not operate
properly because of internet congestion, the quality or
bandwidth of your internet service, or problems at the
provider of the content.
Some internet connection operations may not be
l
possible due to certain restrictions set by the Internet
service provider (ISP) supplying your broadband
Internet connection.
Any fees charged by an ISP including, without limitation,
l
connection charges are your responsibility.
A10 Base-T or 100 Base-TX LAN port is required for
l
wired connection to this recorder. If your internet service
does not allow for such a connection, you will not be
able to connect the recorder.
You must use a Router to use xDSL service.
l
ADSL modem is required to use DSL service and a
l
cable modem is required to use cable modem service.
Depending on the access method of and subscriber
agreement with your ISP, you may not be able to
use the internet connection feature contained in
this recorder or you may be limited to the number of
devices you can connect at the same time. (If your ISP
limits subscription to one device, this recorder may
not be allowed to be connected when a PC is already
connected.)
The use of a "Router" may not be allowed or its
l
usage may be limited depending on the policies and
restrictions of your ISP. For details, contact your ISP
directly.
The wireless network operate at 2.4GHz radio
l
frequencies that are also used by other household
devices such as cordless telephone, Bluetooth
devices, microwave oven, and can be affected by
interference from them.
Turn off all unused network equipment in your local
l
home network. Some devices may generate network
traffic.
For the purpose of better transmission, place the
l
recorder as close as possible to the access point.
In some instances, placing the access point or wireless
l
router at least 1.5 ft (0.45m) above the floor may
improve the reception.
Move closer to the access point if possible or re-orient
l
the recorder so there is nothing between it and the
access point.
The reception quality over wireless depends on many
l
factors such as type of the access point, distance
between the recorder and access point, and the location
of the recorder.
ADSL modem is required to use DSL service and a
l
cable modem is required to use cable modem service.
Depending on the access method of and subscriber
agreement with your ISP, you may not be able to
use the internet connection feature contained in this
recorder or you may be limited to the number of devices
you can connect at the same time. (If your ISP limits
subscription to one device, this recorder may not be
allowed to connect when a PC is already connected.)
The use of a "Router" may not be allowed or its
l
usage may be limited depending on the policies and
restrictions of your ISP. For details, contact your ISP
directly.
Your ISP may protect this recorder from being
l
connected to network when confirming MAC
ADDRESS. In that case, contact your ISP to request to
initialize MAC ADDRESS.
®
0

Advertisement

Table of Contents
loading

Table of Contents