Controlling A Tv With The Supplied Universal Remote Control - LG MEDIA STATION MS400H Owner's Manual

Controlling a TV with the Supplied Universal Remote Control

You can control the volume, input source, and power state of your TV with the supplied Universal Remote Control.
If your TV is listed in the table on pages 53-54, set the appropriate manufacturer code. Follow steps 1-2 as shown
below. You can control your TV using the buttons below.
By pressing You can
TV POWER Turn the TV on or off.
AV/INPUT Switch the TV's input source between the TV and other input sources.
PR/CH +/– Scan up or down through memorized programmes.
VOL +/– Adjust the volume of the TV.
Depending on the TV being connected, you may not be able to control your TV using some of the buttons.
To programme the remote to control the TV using the manufacturer code
If your TV is listed in the table on the next page, set the appropriate manufacturer code.
1
While holding down TV POWER button, press the number buttons to select the manufacturer code for your TV
(Refer to table on the next page).
• If more than one code number is listed, try entering them one at a time until you find the one that works with your
TV.

Release TV POWER button.
• Depending on your TV, some or all buttons may not function on the TV, even after entering the correct manufacturer
code.
• If you enter a new code number, the code number previously entered will be erased.
• When you replace the batteries in the remote, the code number you have set may be reset to the default setting. Set
the appropriate code number again.
TV POWER
TV Control
Buttons
5