Yamaha V50 Operating Manual page 58

for carrier operators, aftertouch will affect volume.
If you raise the EBS setting for modulator operators,
aftertouch will affect tone.
Note:
Unless the sensitivity EBS setting is raised for the
operators you want to affect, aftertouch will have
no effect.
Note:
If you do not want aftertouch to affect volume or tone,
set this to 0.
Reverb
After pressing [__] (FUNCTION), press the [__]
below "REVR" in the display.
PERIT;
Filta
Press the [___] below " > EXIT" in the display to return
to the previous display.
E Function
Set a simulated reverb effect.
E Settings
off, 0—7
E Explanation
A setting of "off" gives no effect. A setting of 1 gives
the most effect (long reverb) and a setting of 7 gives
the shortest effect (short reverb).
Note:
This effect has no connection with the reverb produced
by the V50 DSP effect unit. When the output level
of operator 1 drops below a certain level (— 18dB),
this "reverb" effect slows the RR (RELEASE RATE)
to artificially create a "reverb-type" or "simulated
reverb" effect. When using this, be aware of the fol-
lowing points.
If the RR setting of operator 1 is low (a slow
decay), the output level will take a long time to drop
below ~ 18dB, and the reverb effect will not be heard.
If the AR setting of operator | is 0, the output
level will already be below —18dB, causing this
"reverb" to start immediately, and making the sound
linger for a long time.
54 Voice Edit
Voice name
After pressing [___] (FUNCTION), press the [__]
below "NAME?" in the display.
Be sete, \ 1) = — = a BORG rns,
| ellii VOICE HANES
|ALG 4 HAME © E.ORGHH + + SEMIT]
Press the [__] below " > EXIT" in the display to return
to the previous display.
E Function
Set a voice name.
E Settings
Up to 10 characters
@ Explanation J
This allows you to set a voice name for the voice you
are editing. Page 17 explains how to enter characters.
Effect select, effect balance
Press [| (EFFECT).
thes G8
[e1111 EFECT?
j Li Rewer
(1)
(1) Effect select
Æ Function
Select the type of DSP effect to use with this voice. @
E Settings
off, or one of the following types of effect
Æ Explanation
Select one of the following types of effect.
0: off
No effect
1: Reverb Hall
Reverberation of a large hall
2: Reverb Room
Reverberation of a smaller room
3: Reverb Plate
Reverberation typical of a plate reverb unit
4: Delay
Delayed sound