Yamaha V50 Operating Manual page 71

Clear
Press the [_] below "> CLR".
| PTH
(1) Pattern clear
E Function
Clear the contents of the specified pattern.
E Explanation
When you press the [___] below "> Pattern", the
pattern number will be displayed. After specifying the
pattern number, press the [__] below "> GO", and
you will be asked "Are you sure?". When you press
[+1], the specified pattern will be cleared.
Note:
It is not possible to clear a preset pattern.
(2) Instrument clear
E Function
Clear only a specified instrument from a pattern.
E Explanation
Press the [__] below ">Inst", and the pattern
number and the instrument to be cleared will be
displayed. After specifying the pattern number and
the name of the instrument to be cleared, press the
L] below ">GO", and you will be asked "Are
you sure?". When you press[+ 1], the specified pattern
will be cleared.
Note:
It is not possible to execute this function for a preset
pattern.
(3) All pattern clear
# Function
Clear all internal pattern memories.
# Explanation
Press the [___] below " > All", and you will be asked
"Are you sure?". When you press [+ 1], all the internal
pattern memories will be cleared.
Setup
Press the [__] below "> SETUP".
(1) ° (2) (3)
These settings are shared with the settings of the setup
job in song play mode. They affect various overall op-
eration of the rhythm machine, and will remain mem-
orized even when the power is turned off.
(1) Receive channel
Æ Function
Set the receive channel of the rhythm machine.
E Settings
1—16, omn
@ Explanation
This specifies the MIDI channel that the rhythm
machine will receive. Select a receive channel from
the following.
1-16... The rhythm machine will produce sound only
in response to data received on this channel.
When controlling the rhythm machine from
external MIDI devices, set this receive
channel to match the transmit channel of the
controlling device.
omn ..... The rhythm machine will produce sound in
response to data received on any channel.
Note:
Even if the keyboard transmit channel (see page 99)
and the MIDI channel received by the rhythm ma-
chine do not match, the keyboard will play the rhythm
instruments while in rhythm mode if the "KBD"
setting (see page 59) is set to "RHY".
(2) Transmit channel
@ Function
Set the transmit channel of the rhythm machine.
E Settings
off, 1—16
E Explanation
Set the MIDI channel transmitted by the rhythm
machine. Select a transmit channel from the following.
off........ The rhythm machine will not transmit MIDI
data.
Using the rhythm machine 67