Yamaha V50 Operating Manual page 60

@ Settings
0% — 100%
@ Explanation
The combined volume of the effect and the un-
processed sound is adjusted by this setting. 100%
is maximum, and at 0% there will be no sound.
Note:
At a setting of 0%, neither the unprocessed nor the
processed sound will be heard. (However if the next
item stereo mix is on, then only the unprocessed sound
will be heard.)
Note
If the DSP sound is distorted, decrease the (DSP)
Effect Output Level or the Synthesizer Volume.
(2) Stereo mix
E Function
Mix the processed sound with the unprocessed stereo
sound.
E Settings
off, on
E Explanation
When this setting is on, the effect processed sound
will be combined with the unprocessed sound. (Note
that if this setting is off, the performance effect PAN
will have no effect.)
Effect parameters
Press {___] (EFFECT) three times. (If the previous item
effect select has been set to "off", this will not be dis-
played.)
[1111 EFET::
@ Function
Make detailed settings for the effect.
@ Settings
Each type of effect has different settings.
E Explanation
Make detailed settings for the effect as explained in
the charts on page 32.
It is possible to copy effect settings to another
performance or voice (see page 120).
56 Voice Edit
E Function
Make detailed settings for the effect.
@ Settings
Each type of effect has different settings.
Æ Explanation
Make detailed settings for the effect as explained in
the charts on page 32.
It is possible to copy effect settings to another
performance or voice (see page 120).