Yamaha V50 Operating Manual page 73

E Explanation
Set the volume of the instrument you selected in (1).
0 is minimum and 15 is maximum volume.
(3) Pan
E Function
Set the pan position of each instrument.
E Settings
L-R (7 steps)
Ë Explanation
Set the pan position (the position of the sound when
played in stereo) of the instrument you selected in (1)
over the following seven steps.
ee Far left
$
bajol R Center
f
L ial ata Far right
Note:
If only the L output is connected to an amp, you will
hear the sound in mono, and this setting will have
no effect. (You will hear the stereo sound if listening
to headphones, however.)
(4) Note
8 Function
Set the MIDI note number of each instrument.
E Settings
C-2 - C8
S Explanation
Set the MIDI note number of the instrument you
selected in (1).
(5) Rhythm volume
E Function
Set the volume of the entire rhythm machine.
E Settings
0-99
# Explanation
This setting determines the volume for the entire
rhythm machine. It has no connection with the in-
strument selected in (1).
Use this setting to adjust the volume balance of
the rhythm machine and the synthesizer. 0 is mini-
mum, 99 is maximum volume.
Note:
The synthesizer also has a setting for overall synthe-
sizer volume. Use these two settings to adjust the
volume balance between the rhythm machine and
synthesizer.
(6) Effect select
Æ Function
Determine how effect processing will apply to the
rhythm machine.
@ Settings
off, on, mix
Æ Explanation
This setting has no connection with the instrument
selected in (1). It affects the entire rhythm machine.
This setting determines whether the effects unit
will process the sound of the rhythm machine. The
same effect will apply to both the rhythm machine
and the synthesizer. It is not possible to use a different
effect for the rhythm machine.
Select one of the following
off........ The rhythm machine sound will not be pro-
cessed.
On........ The rhythm machine sound will be processed,
and stereo mix will not be used, meaning that
all rhythm instruments will sound in the
center of the stereo field.
mix...... The rhythm machine sound will be processed,
and stereo mix will be used, preserving the
stereo placement of the rhythm instruments.
Rhythm assign
Press the [= | below " > ASGN".
|EHYTHM ASSIGNS
| PFEESETI C
Inet |
BD 1 SEITI
These settings are shared with the settings made in the
song play mode job rhythm assign. Rhythm assign de-
termines which rhythm instrument will sound when each
key is played; i.e., the instrument layout across the
keyboard. This setting is remembered even when the
power is turned off.
The V50 has three "instrument layouts" in permanent
memory; PRESET 1—3. (These cannot be modified.)
PRESET | —3 are set as follows.
PRESET | is set to match the key assignments of
the Yamaha RX series rhythm programmers. However,
Using the rhythm machine 69