Advertisement
6.6 Starter
6.6.1 To disassemble the Starter
Locate the starter.
Figure 1
1. Remove the M6 bolts (A) and the washers (B).
2. Remove the complete starter (C)
D
Figure 2
3. Disconnect the electric wires that are linked to the
stop switch.
Figure 3
E
C
B
A
4. Remove the bolts (D) and remove the starter cover
(E) from the product.
D
Figure 4
6.6.2 To clean and examine the Starter
Clean the stater (C), Figure 2. Examine that the starter
handle can be pulled out fully and that the spring pulls
the starter handle back to its original position.
6.6.3 To assemble the Starter
Assemble in the opposite sequence.
Repair instructions
E
C
B
A
English - 17
Advertisement
