Advertisement
C
D
Figure 3
Driving over a discharge hose while the pump is run-
ning, or even possibly when the pump is stopped, may
cause pump case failure.
To start the engine
1. Fill the product with fuel and engine oil.
2. Prime the pump.
3. Move the fuel valve lever (E) to the ON position. See
figure 4.
OFF
Figure 4
4. To start a cold engine, move the choke lever (F) to
the CLOSED position. To restart a warm engine,
leave the choke lever in the OPEN position. See
figure 5.
F
CLOSED
Figure 5
E
ON
OPEN
Prepare and do servicing on the product
5. Move the throttle lever (G) away from the SLOW
position about 1/3 of the way toward the FAST posi-
tion. See figure 6.
FAST
Figure 6
6. Turn the ignition switch (H) to the ON position. See
figure 7.
ON
OFF
Figure 7
7. Pull the recoil starter grip (I) lightly until you feel
resistance, and then pull briskly. Do not allow the
recoil starter grip to snap back against the engine.
Return it gently to prevent damage to the starter.
G
SLOW
H
English - 7
Advertisement
