MAINTENANCE PROCEDURE
EVERY 2000 HOURS MAINTENANCE
Carry out the maintenance for EVERY 500 HOURS, and EVERY 1000 HOURS SERVICE at the same time.
CHANGE OIL IN HYDRAULIC TANK, CLEAN STRAINER
The parts and oil are at high temperature after the engine is stopped, and may cause burns. Wait for the temperature to go down
before starting the work.
When removing the oil filler cap, turn it slowly to release the internal pressure, then remove it.
Container to catch drained oil: Min. 20 liters (5.28 US gal) capacity
Refill capacity: 20 liters (5.28 US gal)
Prepare a handle (for the socket wrench).
1. Swing the upper structure so that the drain plug under the
hydraulic tank will be between both tracks.
2. Retract the arm and bucket cylinders, then lower the boom and
put the teeth in contact with the ground.
3. Lower the blade to the ground.
4. Set the safety lock lever to the LOCK position and stop the
engine.
REMARK
For machines equipped with a cab, there is only a safety lock lever
on the left.
4 - 58
WARNING
MAINTENANCE