Hitachi PSC-A32MN Installation And Operation Manual page 50

Operation
5.3.2 Filter Sign Reset
5.3.2.1 Reset Filter Sign
1 Select "Filter Sign Reset" at the "Menu" screen. (This is available only when the filter sign is indicated)
2 Select the target to reset the filter sign.
• Tap "Display with Sign" to indicate only the groups with filter sign.
• The target groups are indicated in yellow.
• When selected, a " " sign appears on the group button.
3 Tap "Execute reset".
4 Tap "Yes" on the confirmation window, to reset the display of the filter sign and the operation time.
Tap "No" to return to the "Filter Sign Reset" screen.
(2)
After resetting filter sign, the button becomes inactive.
5 Tap "Menu" to return to the "Menu" screen.
?
N O T E
• This screen may be different depending on the Control pattern. The screen above displays the pattern A (4 blocks × 8 groups) set by the Control
pattern.
• Filter Sign is indicated if the operating time of the Filter reaches the time set.
42 PMML0332A rev.0 - 05/2015
(1)
(3)
(5)
(4)