Hitachi PSC-A32MN Installation And Operation Manual page 51

Operation
5.3.2.2 Reset Filter Operating Time
1 Select "Filter Sign Reset" at the "Menu" screen. (This is available only when the filter sign is indicated)
2 Select the target to reset the Filter operating time.
• Tap "Display All Groups" to target all groups.
• The target Groups are indicated in Yellow.
• When selected, the group button will be indicated with a "
3 Tap "Execute reset".
(1)
4 Tap "Yes" on the confirmation screen.
• The group that indicated Filter Sign will reset Filter Sign and Filter operating time.
• The group that did not indicate Filter Sign will reset Filter operating time.
• Tap "No" to return to Filter Sign Reset screen.
5 Tap "Menu" to return to Menu screen.
(4)
?
N O T E
• This screen may be different depending on the Control pattern. The screen above displays the pattern A (4 blocks × 8 groups) set by the Control
pattern.
• Filter Sign is indicated if the operating time of the Filter reaches the time set.
43 PMML0332A rev.0 - 05/2015
" sign.
(2)
(5)
(3)