Storage; Disposal - Silvercrest SMG 2.4 B1 Operation And Safety Notes

Do not use abrasive, aggressive or chemical cleaning agents to
clean the product. It could damage the product.
For easier cleaning, pull the massage rollers
Clean them in warm water with a little mild soap.
Rinse off the soap residues thoroughly and allow the massage
rollers to dry in the air. When they are dry, push them back
4
onto the drive shaft of the product.
Wipe the product with a damp cloth. If necessary, add a little
detergent to the cloth and wipe the product off afterwards with
a cloth dampened with clear water.
Wipe the AC-DC adapter
Make sure the AC-DC adapter
the next use.

Storage

Clean the product as described in the section "Cleaning and care".
If the product is not used for a certain period of time, store the
product in a clean and dry location.

Disposal

The packaging is made entirely of recyclable materials, which you
may dispose of at local recycling facilities.
Observe the marking of the packaging materials for waste
separation, which are marked with abbreviations (a) and
b
a
numbers (b) with following meaning: 1–7: plastics/20–22:
paper and fibreboard/80–98: composite materials.
28 GB/IE
and mains cable with a damp cloth.
5
has completely dried off before
5
off of the product.
4